Purefast pure water window cleaning trolley hire – 125 litre

The purefast 125 trolley system is a very popular hire  choice and ideal for on-site window cleaning around schools, colleges, shopping centres, business parks etc. The purpose-built, 125 litre low profile water tank is mounted on a two wheel trolley with large puncture proof tyres and fitted with a 12 volt 100psi water pump, digital pump controller and a heavy duty deep cycle battery with “smart charger”.  The battery provides enough power for a full 12 hour + day and then recharged over night.

Setting up is very easy, connect the 3 metre link hose to a tap and the Di resin filter (which makes instant pure water). Connect another link hose from the resin filter to the trolley and fill the water tank. The trolley is fitted with a hose reel containing 50 metres of 8mm lightweight hose which is then connected to a waterfed pole via a quick release tap on a belt, which you can use to shut off water flow remotely when moving between windows. You are now ready to work from ground floor up to 9 metres (30′). Carbon fibre waterfed poles extending up to 20 metres are also available at extra cost.

We supply Unger Di resin on sale or return and the quantity required will depend on the incoming water hardness. The resin can be changed quickly and easily and a TDS Meter,( to test water purity)  is supplied so you can monitor the condition of the resin. Two glass fibre  waterfed poles are supplied, a 6.00 metre (20′) pole is suitable for ground floor and first floor windows and a 9.4 metre (30′) pole for second and third floor windows. You can upgrade to carbon fibre poles at additional cost.

Standard Hire rate without additional equipment: 1 Day £87.50 2 Days £131.25 Week £175.00

The key to achieving spotless, streak free windows and cladding is pure water. The water needs to be almost 100% pure to be effective, so when it evaporates from the glass or cladding, no water marks or deposits are left behind. Using pure water also helps to keep the glass cleaner for longer periods than traditional systems and does not require the use of a squeegee.

How is tap water converted into pure water?

Making water pure is very easy, thanks to our Di Resin filters. Tap water is passed through a filter vessel (which looks rather like a large fire extinguisher) packed with high capacity, mixed bed ion exchange resin, which produces virtually 100% pure water immediately and without any water loss or wastage. The cost of this process in most hard water areas is around 0.02p per litre of water (if you purchase your Di resin from us!) and a full day’s window cleaning with one waterfed pole consumes on average 400 litres. Pure water is produced at the same rate as the flow in your hosepipe, so there is minimal down time when filling containers or water tanks. purefast Di Resin filters are extremely simple to use and work perfectly well in all but freezing weather conditions and they can be connected between a tap and a waterfed pole or tank, without any additional equipment.

Just as much as glass becomes soiled, window frames retain dirt and previously used detergents. On a first clean with a pure water system these impurities have to be released by brushing and then rinsing away. Once the frames have dried a second and sometimes a third pass over the glass produces crystal clear windows. From then on, the next time the windows are cleaned, sparkling glass is achieved in just a few brush strokes. Practice and experience improves your pole technique and the cleaning task gets easier, quicker and requires less effort.

If you would like to know more about purefast waterfed pole pure water window cleaning systems or to book a no obligation and free demonstration on your premises please contact us and we will be pleased to help.